Worldwide | USA
- Washer Extractors
- - Hardmount Pocket
- - Hardmount Cabinet
- - Top Load
Washer Extractors > UWN125T3V
Printable Spec Sheet
Applications: Our best selling model selected by medium to high volume laundries placing more emphasis on lower operating costs than machine selling prices.
Examples: Hotels, nursing homes, industrial laundries, professional sports clubs, correctional facilities, hospitals, fire departments and professional cleaners.
Rigid Mount UWN125T3V Features include:
- 4 Fast Fill Inlet Valves
- Rapid Jet Spray Rinse
- Super High 200 G - Force Extraction
- 41 Cycle Programmable Control
- Ultrasoft Wash
Control
| UniLinc Control | |
 UniLinc Control - The Pinnacle of laundry management, it combines unparalleled flexibility and ease of use to obtain the ultimate level of efficiency for your operation. | |
| Control Features | |
| Manual operation capable | yes |
| Number of cycles | 41 |
| Field programmable | yes |
| Maximum G-Force | 300 |
| Rapid jet spray rinse | yes |
| Auxiliary heat capable | yes |
| Water reuse capable | yes |
| Energy saving drive capable | yes |
| Ultrasoft wash capable | yes |
| Maximum number of water valves | 4 |
| Number of programmable water levels | 30 |
| Labor management cycles counter | yes |
| Maximum number of wash actions | 10 |
| Troubleshooting front panel output | yes |
| Delayed start capable | yes |
| Overnight soak capable | yes |
| Hand held programmer capable | yes |
| Maximum number of programmable supplies | 8 |
| Maximum number of extract speeds | 5 |
| Temperature controlled fill | yes |
| Maximum number of wash speeds | 2 |
| Thermal cool down | yes |
| Rapid Advance | yes |
Specifications
| Dimensions | |
| Capacity - kg (lb) | 57 (125) |
| Width - mm (in) | 1219 (48") |
| Depth - mm (in) | 1473 (58") |
| Height - mm (in) | 1829 (72") |
| Cylinder Diameter - mm (in) | 1067 (42") |
| Cylinder Depth - mm (in) | 610 (24") |
| Cylinder Volume - liters (cu. ft.) | 544 (19.24) |
| Door Opening Size - mm (in) | 508 (20") |
| Door Bottom To Floor - mm (in) | 737 (29") |
| Speeds | |
| Gentle Speed - RPM | 26 |
| Wash Speed - RPM | 37 |
| Distribution Speed - RPM | 62 |
| G-Force | |
| High 3 Extract - RPM | 200 (580) |
| Connections | |
| Water Inlet - mm (in) | 2 @ 25 (1") and 2 @ 19 (3/4") |
| Steam Inlet - mm (in) | 19 (3/4") |
| Drain Diameter - mm (in) | 2 @ 76 (3") |
| Motor | |
| Motor Size - kW (HP) | 7.5 (10) |
| Shipping | |
| Net Weight - kg (lb) | 1100 (2420) |
| Agency Approvals | |
| Agency Approvals | CE, cETLus |
* Two and three speed washers may not include all of the features within the brochure. ** Agency approvals may vary depending on configuration Consult factory for details. Standard domestic voltagea 208-240V/60Hz/3 phase. 230V/50Hz/1 and 3 Phase and 380V/50Hz/3 phase units are available. All CE approved models available in 50-cycle. Contact your distributor for specific models available with CE. For electrical specs, circuit breaker requirements and full load amperages see your authorized UniMac distributor. Manufacturer strongly recommends using a circuit breaker instead of fuses. Use 3-pole circuit breakers for 3-phase machines. Due to continuous product improvements, design and specifications subject to change without notice. The quality management systems at all Alliance Laundry Systems manufacturing facilities are registered as ISO 9001:2000 compliant. | |
Products
Distributor Locator
Contact Us
News
Environmental Impact Statement
Laundry Design Service Privacy Statement Terms of Use Support Site Map
Laundry Design Service Privacy Statement Terms of Use Support Site Map
®Registered Trademark of Alliance Laundry Systems LLC ©2013All Rights Reserved