Worldwide | USA
UniMac International Commercial Laundry Equipment
My Industry     Products     Distributor Locator     Laundry Design Service     Support     Contact Us     News
Washer Extractors > UCN020GN2

Printable Spec Sheet



Applications: Low volume laundries placing less emphasis on operating costs than machine costs.

Examples: Athletic facilities, small motels, residential care facilities.

Rigid Mount UCN020GN2 Features include:
  • Heavy Duty Gamma A-Frame
  • 4 Cycle Programmable Control
  • Stainless Steel Construction
  • Automatic Supply Dispenser (4 Compartments)
  • Industry Leading 3 Year Limited Parts Warranty on all Components, 2 Years on Basket, Shaft, Frame, Bearings and Seals


Control

M4 Control
Designed with 4 pre-programmed cycles which can be customized for maximum water savings and the control is easy for operators to use.
Control Features
Programmable Cycles and water levelsYes
Number of cycles4
Preset Cycles4
Maximum G-Force86
Change from Celsius to FahrenheitN/A
Auxiliary heat capableYes
Water reuse capableNo
Energy saving drive capableNo
Ultrasoft wash capableNo
Maximum number of water valves2
Number of programmable water levels2
Labor management cycles counterYes
Maximum number of wash actions2
Troubleshooting front panel outputYes
Overnight soak capableNo
Programmable from computerNo
Maximum number of programmable supplies4
Maximum number of extract speeds1
Temperature controlled fillNo
Alpha numeric "Progress Display"Yes
Thermal cool downNo
Rapid AdvanceYes
Diagnostics (cycle count, # hours running)Yes
Wet CleanNo

Specifications

Dimensions
Capacity - kg (lb)9 (20)
Width - mm (in)660 (26")
Depth - mm (in)767 (30 1/4")
Height - mm (in)1067 (42")
Cylinder Diameter - mm (in)533 (21")
Cylinder Depth - mm (in)349 (13 3/4")
Cylinder Volume - liters (cu. ft.)78.1 (2.76)
Door Opening Size - mm (in)295 (11 5/8")
Door Bottom-To-Floor - mm (in)365 (14 3/8")
Speed
Wash Speed - RPM55
Distribution Speed - RPMN/A
Extract Speed - RPM519
Extract G-Force82
Connections
Water Inlet - mm (in)2 @ 19 (3/4")
Steam Inlet - mm (in)1 @ 13 (1/2")
Drain Diameter - mm (in)1 @ 51 (2")
Drain Height To Floor - mm (in)114 (4 1/2")
Motor
Motor Size - kW (HP) - W.11 (.15)
Motor Size - kW (HP) - E.55 (.74)
Voltage/Hz/Phase
B: 120/60/1 - 20-16
C: 380-415/50/4/3 - 15-4
F: 440-480/60/3/3 - 15-4
J: 200/50/3/3 - 15-5
O: 208/220-240/60/3/3 - 15-5
Q: N/A
R: N/A
X: N/A
Y: 208/220-240/60/2/3/1 - 15-8
Shipping
Net Weight - kg (lb)176 (387)
Shipping Weight - kg (lb)191 (420)
Shipping Height - mm (in)1308 (51 1/2")
Shipping Width - mm (in)749 (29 1/2")
Shipping Depth - mm (in)879 (34 5/8")
Export Shipping Weight - kg (lb)215 (475)
Agency Approvals
Agency ApprovalsCE, cETLus

* Overall depth includes drain pipe and door handle.

** Standard domestic voltage 208-240/60/3. Circuit breaker and amp draw data shown is for standard voltage models without auxiliary heat. Consult factory for other configurations. Manufacturer strongly recommends using a circuit breaker instead of fuses. Use 3-pole circuit breakers for 30-phase machines.

*** Agency approvals may vary depending on configuration. Consult factory for details. Steam connection requires 1/2" N.P.T.

Due to continuous product improvements, design and specifications subject to change without notice. The quality management systems at all Alliance Laundry Systems manufacturing facilities are registered as ISO 9001:2000 compliant.


English Español Français Italiano Deutsch 中文 Русский 日本語
Products Distributor Locator Contact Us News Environmental Impact Statement
Laundry Design Service Privacy Statement Terms of Use Support Site Map

®Registered Trademark of Alliance Laundry Systems LLC   ©2013All Rights Reserved